Sample Preparation (page 2)
see more >> Sample Preparation
(page 1)
|
|  Temperature Recorders
Maintaining
records of temperature in curing rooms is easy with the Temperature
Chart Recorder. It provides a 7-day record on a 4 inch
circular chart. The unit operates on a single "AA" battery and may
be used as a portable recorder or wall mounted.
The microprocessor version, not shown, allows user selection of
the range, alarm points, recording time and measurement scale. An
LCD display shows maximum and minimum readings and alarms. It uses
a 6 inch chart and is supplied with a 1 point NIST traceable calibration
certificate. |
| |
Tank Heater and Circulating Pump
 Designed
for curing tanks, the heater will provide temperature controlled heated
water. The themostat is adjustable between 350F and 950F. The element
is protected by a themal cut-out. Internal wiring is within a steel
cover with a conduit fitting for the input power, 115 V (ac), 850
W, and a mounting bracket. Pump is subersible |
| |
Concrete Cylinder Curing Box
 A
field portable curing box with built-in temperature controlled heating
system. Made of durable plastic with a steel bottom rack to enhance
water circulation and ensure even curing. Designed and factory tested
to accommodate ASTM specified curing temperature requirements: 73.4F
± 3F for 48 hours. It will hold up to 22 standard 6 x 12 in. cylinder
molds, has a lockable lid and will never rust or corrode. Applicable
Standards: ASTM C 192, C 511, C 31 AASHTO M-201, T-126, T-23 |
| |
Humidifier
 Designed
to provide humidity levels up to 95% for a concrete cylinder curing
room. It produces 5 lb (2 kg) of water vapor per hour, sufficient
for a 2,000 cubic foot room (57 cubic meters). An adjustable brass
float controls water usage at pressures up to 75 psi (517 kPa). The
Humidifier is provided with 1/8 in. NPT water inlet and 1/4 inch FPT
water overflow fittings and a sealed motor section. |
| |
|
For more information:
Catalog Pages
|
