|  This
resistance-type meter is designed to detect moisture level in concrete,
masonry, wood, plaster,
gypsum, roofing and insulation - virtually any hygroscopic building
material. Meter features a functional
plastic
case with built-in handle and integral 5/16 in (7.9 mm) contact
pins to permit easy one-hand operation with fingertip controls.
Cable-mounted accessory electrodes with short 5/16 in or long 3-1/4
in (83 mm) pins and 36 in cable are also available for attachment
to the built-in connector.
Three separate scales have ability to average up to 50 accumulated
readings.
Meter measures 7.5 x 3.0 x 1.8 in (191 x 76 x 44 mm). Short 5/16
in max. penetration pins, as attached to meters or electrodes,
are
for concrete, brick, wood, plaster, masonry, etc. The longer 3.25
in pin electrodes for below-surface testing of roof decks or in
roof or wall insulation are included. Contact pins are replaceable
in both types and 6 spare short pins are provided with each order.
 |
C-567 |
Digital Construction Moister Tester |
|
