Designed
to provide humidity levels up to 95% for a concrete cylinder curing room.
It produces 5 lb (2 kg) of water vapor per hour, sufficient for
a 2,000 ft³ room (57 m³). An adjustable brass float
controls water usage at pressures up to 75 psi (517 kPa). The Humidifier
is provided with 1/8 in. NPT water inlet and 1/4 inch FPT water overflow
fittings and a sealed motor section. 14.5-in diameter x 10 in high (37
x 27 cm). Shown with unidirectional flow. Available with half and full
blow.
C-250
Humidifier,
115 V, 60 Hz
Accessory
C-25010
Humidistat
Controller
Note: a larger-capacity humidifier is available in 200 V, 50/60 Hz and
uses the same C-25010 controller
.
Designed
to provide humidity levels up to 95% for a concrete cylinder curing room.
It produces 5 lb (2 kg) of water vapor per hour, sufficient for
a 2,000 ft³ room (57 m³). An adjustable brass float
controls water usage at pressures up to 75 psi (517 kPa). The Humidifier
is provided with 1/8 in. NPT water inlet and 1/4 inch FPT water overflow
fittings and a sealed motor section. 14.5-in diameter x 10 in high (37
x 27 cm). Shown with unidirectional flow. Available with half and full
blow. 
