Unconsolidated Undrained Triaxial Compression Test
on Cohesive Soils
|
| Part Number |
Description |
| S-600 |
Triaxial Load Frame
Or S-6100E Load Frame, 0.005 to 0.200 speed range
|
| E-212 |
Load cell, 2,000 lb capacity |
| E-405 |
Digital Readout calibrated to E-212 |
| S-500 |
Panel, 3 burettes for one cell |
| S-502 |
Extension Panel, 6 burettes for 2 cells |
S-505
Or
S-530 |
Deairing Tank
Or
Nold Deairing Apparatus
|
| S-510 |
Triaxial Cell with 1.4 and 2.8” accessories |
| E-814 |
Dial Indicator, 1.0 inch x 0.001 |
| S-54028 |
Membranes, 2.8” |
| S-57028 |
Membrane Stretcher, 2.8” |
| S-56128 |
Glass Fiber Filter Disc, 2.8” |
| G-5002G |
High Vacuum Grease |
| G-192 |
Dial Caliper, 0-6” |
| GW-342 |
Dual Range Electronic Balance
OR GW-115 Triple Beam Balance, 2610 x 0.1 gram
And GW-110 Dial-O-Gram, 310 x 0.01 gram |
| G-400 |
Vacuum Pump |
| G-410 |
Laboratory Air Compressor |
| TR-738 |
Filter Regulator Assembly |
| S-57428 |
Split Mitre Box, 2.8” |
| G-295 |
Wire Saw |
| G-29402 |
Large Sample Knife |
| S-35710 |
Straight Edge, Beveled |
| Equipment to perform ASTM D 2216 Moisture Content of
Soils also needed |
| |
Items to extrude sample from Shelby Tube: |
| S-240 |
Sample Extruder
And S-24030 Sample Tray for S-240 extruder
Or S-329 Sample Ejector
And S-32924 Adaptor Plate and Piston, 2.8” |
| |
Items to remold sample (technique will decide
actual items): |
| S-57729 |
2.875 x 6” Compaction Mold
|
| S-57730 |
Spacer Plug, 2.85 x 2” |
| S-57728 |
Gauge Block |
| G-510 |
Rubber Mallet |
| S-577 |
Sliding Weight Hammer |
| S-575 |
Pneumatic Kneading Compactor |
| S-57528 |
Split Compaction Mold |
| S-57228 |
Vacuum Split Mold |
| |
Optional and Suggested Spare Items: |
| S-53028 |
O-rings, pack of 4, 2.8” |
| S-55028 |
Porous Stones, 2.8”, |
S-57629
And
S-57606 |
Soil Sample Trimmers, Lathe
And
2.8” cap
for S-57629 Trimmer |
