ASTM B 215, C 136, C 702, C 778, D 421, D 424, D 457, D 806
AASHTO T-27, T-144, T-248
The Gilson® range of Sample Splitters feature patented adjustable
width chutes and a lever released hopper. This results in good
accuracy for mixing and reducing samples to representative smaller
volumes suitable for laboratory testing.
The adjustable width chutes allow one splitter to replace several
fixed chute splitters. These Splitters are available with load
capacities from 50 lb to 500 lb and particle sizes from 60 microns
to 6 in. Three models are featured here with capacities from 1
ft3 down to 125 in3 and particles from 4 in to ¼ in.
The universal chute section is comprised of a set of precise
dimensioned aluminum bars that pivot about a rod through their
lower ends. The top ends of the bars are flipped to alternate sides
to form chutes of pre-determined widths.
The splitters are made from durable steel with a baked paint
finish with aluminum chute bars and pans. Model P-502 is made from
stainless steel, except for the aluminum chute bars and pans. All
models come with two sample pans.
|
