 |
Well Seal with Air In and Fluid Out kits. |
Well Seals
For landfill leachate and gas wells
DGSI manufactures a family of well head seals. The DGSI well seals provide an easy method to connect fluid and air lines, simplifying installation. Strain relief seals isolate the individual tubing sizes that support the operation of a pneumatic pump from the particle vacuum being placed on the well for methane removal.
The well seals are attached to the casing by mating flanges or by sealing on the diameter of the well casing with a Fernco-type flexible coupling.
Additional threaded openings through the seals are provided for fluid level, pressure and or temperature measurement.
Well seal accessories include an air-in / fluid-out kit, manifold flanges, pump exhaust diversion kit and pump flow control. Each well seal assembly includes hose clamps for attaching bundled Nylon™ tubing to an MVP pump and cable clips for securing the stainless steel cable for pump support.
Strategic mounting brackets that provide support for filter regulators and pulse counters are standard on all well seals.
Additional DGSI landfill leachate or gas support products include:
MVP pneumatic pumps
Nylon bundled air and fluid tubing
Cycle / pulse counter
Stainless-steel pump support cable
Selection
Select part numbers from the groups below as you need them.
(Click on a part
number to see the corresponding drawing and parts list.)
| Well Seal Flange or Plug Style |
|
| Air In / Fluid Out Kit |
| |
|
 Air
In |
 Fluid
Out |
Part
Number |
|
|
| Manifold |
for Air In |
|
for Fluid Out |
|
| |
FLUID OUT MANIFOLD
|
| SIZE |
2" |
3" |
4" |
| Part Number |
|
|
|
| |
AIR IN MANIFOLD
|
| SIZE |
2" |
3" |
4" |
| Part Number |
|
|
|
|
|
|
|
|
|
Exhaust Diversion Kit |
|
Flow Control Kit |
| |
|
| |
|
|
|
| Part Number |
|
|
|
| |
|
| |
|
|
|
| Part Number |
|
|
|
|
|
TR-27601
TR-272