SepTek™ (Fig. A) used in combination with the SEP IV electric submersible pump (Fig. B) is the simplest way to maintain a stable and precise drawdown level in the well for extended periods. Installation is easy. Simply place SepTek in line above the SEP IV or other electric pump exactly where the desired water level is to be maintained and walk away! The SeptTek/SEP IV Combo will do the rest. It’s simple and maintenance is low.

No need for cycling submersible motors on and off. No expensive relays, no VFD’S, no throttling valves.

The SepTek is installed above the SEP IV or other electric pump at the desired water table drawdown level. When the pump is activated, the internal float will respond by directing the liquid to the surface or recirculating it in the well to match the fluid output to the recharge rate of the well which maintains the desired level. The pump will operate continuously, increasing the motor life. The SepTek System provides for full fluid discharge with no head loss or restrictions. It is constructed of a PVC body, brass bypass valve, cast bronze and stainless steel linkage.

See an illustration of how it functions >>

TR-586	SepTek with 1 in inlet and discharge

Fig. A

Fig. B