Sep IV Auto Speed Control System
 
Electrical level control system to Increase pump life by reducing the number of motor starts and stops.
Application:

Maintain a precise draw-down level in a well for extended periods.

 

Description

• Control panel for 1 to 4 pumps
• Variable speed drive module
• Digital readout 4-20 mA
• Mini transducer

The SEP IV Auto Speed Control System is used with a mini pressure transducer mounted above the electrical pump to maintain precise water table drawdown. The inches of water above the pump will be displayed on the control panel. The user selects the desired liquid level to be maintained. The transducer works with the variable speed drive matching the motor speed to the well recharge reducing motor starts and stops to increase motor life. Should the motor speeds not be able to match recharge rates, liquid high and low levels can be selected to turn the pump off. Three phase motors are required with this system. The maximum distance from the pump to the control panel is 175 ft. Greater distances will require the use of line filters . Transducer selection will be based on the desired water column above the pump. When designing the system, necessary information includes: well depth, inches of water above the pump, desired water table drawdown and the distance from the pump to the control panel. The system requires a 115 V (ac) supply with voltage spikes not to exceed 10%. It is necessary to protect the power supply from surges to prevent damage to the system electronics.

TR-500

Auto Speed Control, 1 pump, 1/2 hp

Other choices available. Please call.

 


Related items:
> SEP IV electric submersible pumps.
> PumpSaver — pump monitor designed to protect single phase pumps from dry wells, dead head, jammed impellers, and over/under voltage conditions.
> SepTek mechanical down-well controller — an ideal mechanical device to use with the SEP IV pumps to maintain a desired level of water table draw-down.