Groundwater remediation pumps
Top: MVP IV, 4-in, top loading
Middle: MVP IV, 2-in, bottom loading
Bottom: MVP LS for landfills
Brochure
User Manual

MVP IV Groundwater Remediation Pump

Ground water remediation pump for use in 4-inch and larger-diameter wells and up to 200 ft.

Applications

  • Dissolved phase
  • Total fluids
  • Plume control
  • Dewatering
  • Leachate

Description

The MVP IV pump kit includes:

The MVP IV Pump uses an internal float that responds to the fluid level within the pump body to cycle the pump automatically, based on the recharge of the well. As the pump fills with fluid, the float moves to the upper position, activating the mechanical arm which opens the air inlet valve. This allows air to enter the pump chamber, simultaneously pressurizing the vessel and closing the upper and lower inlet check valves. As a result, the fluid moves to the surface. As the fluid is emptied from the vessel, the float returns to the lower limit — off position — closing the air inlet and opening the air exhaust valve. During the filling cycle, air is vented through the exhaust port and the cycle is automatically repeated. See how the top loading pump and the bottom loading pump work (animated graphics).

See brochure for other types and configurations, and for the selection table for the MVP Series Pumps.

For more information

> Brochure (PDF, 249 KB)
> Hose selection table (PDF, 227 KB)
> Air Flow and Pressure Loss table (PDF, 255 KB)
> Water Flow and Pressure Loss table (PDF, 241 KB)
> User Manual (PDF, 241 KB)

Related items

> MVP LS and MVP LD — leachate and condensate pumps for use at landfills
> Product/Water Interface Probe
> CapCop protection vault