Well Clincher shown with filter/regulator

Well Clincher and Filter/Regulator

The Well Clincher serves as a well seal and pump support. It simplifies hose connection. A retractable handle provides for easy installation or removal of the pump system. The 90° fittings on the top of the Clincher reduce the possibility of kinked hoses in the well vault. Expandable Well Clinchers with pass-through ports are available for installations requiring frequent pump adjustments.

The Particulate Filter/Regulator should be installed at the well head to supply the proper air pressure to the MVP IV Pump. This will optimize air consumption. A good guideline for setting the air pressure is 0.5 psi per foot of pump depth.

Tech Tip: Air consumption of the MVP IV pump is based on the depth and PSI setting. For a simple calculation use 1 cfm per gallon pumped. This is the maximum the pump will consume.